DSE5120 self starting controller
Self starting controllers: DSE5110, DSE5120, DSE5210, DSE5220, DSE501K, DSE701, DSE702, DSE704
DSE5120 self starting controller
The design of DSE5120 generators for backup power, automatic monitoring, automatic control of electric generator state, start and stop, automatic control switch, dual power switch (ATS); the bright LED and LCD indicates the current working state, the relevant parameters, fault content etc.;
You can connect to the PC computer via the P810 communication interface and quickly set parameters!
Main features:
Microcomputer control
Auto start, stop
Real time display unit operation status and parameters
Visual alarm and status graphic identification, quick display of crew information
LED and LCD alarm instructions
Programmable relay output, suitable for a wide range of models
Control function:
Emergency stop control.
Automatic turning control.
Start delay control.
Local manual start / stop.
Remote automatic start / stop.
Start the motor and exit automatically
Preheating and pre feeding control
Warming up, lifting speed, idle / running control
Chiller and parking power supply control
ATS switching control
Protection function:
Low oil pressure protection
Charger failed
Emergency shutdown of generator set
Generator set public alarm
Generator over voltage, over voltage, over load protection
High cooling water temperature protection
Engine overspeed protection
Engine under speed protection
Engine failure failed
Engine start failure
Parameter display:
engine speed
Battery voltage
Engine lubricating oil pressure
Engine cooling water temperature
Output frequency of generator set
Operation time of generator set
Generator output AC phase / line voltage
Load AC phase current
AC AC voltage
Warning indicator:
The corresponding alarm indication sign on the LCD
The public alarm lamp is stably displayed, indicating a warning fault; flashing indicates a stop fault
Configuration method:
Configure parameters through the controller front panel
Mounting hole size: 220*160mm