We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Your position: Home / Automation Electric Parts / Electromagnetic valve

Generator, battery, battery charger, smart charger, automatic identification, CH2804, 4A, 12V24V

Generator, battery, battery charger, smart charger, automatic identification, CH2804, 4A, 12V24V
Quantity:
-
+
(299 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
Please select the information you wantX
  • Description
  • Reviews(41)

 

The intelligent charger is designed for - engine start / run battery design, especially suitable for the lead-acid battery, the charger can know according to the different situation of battery voltage, automatic adjustment of constant current fast charge, floating, full stop, self charging power loss etc., at the same time with automatic overcurrent and short-circuit protection etc. with the function, common charger in the intelligent charger, which can avoid damage to the battery to prolong the service life of the advantages of automatic voltage - body

Input: 220VAC

Output: 12VDC or 24VDC

Current is 4A~10A (according to customer requirements, our factory regulates current to customers, such as 6A, 7A, 8A, 9A, 10A)

 

Installation instructions;

ZH-CH2804 series smart charger is designed for battery charging. It has constant voltage, constant current, trickle, full stop, short circuit and other functional characteristics.

OneScope of application;

1.1, suitable for all kinds of brands, models, power - engine matching.

1.2 working voltage AC 160 to 250V, working frequency 20 ~ 100Hz, can guarantee the engine at low speed (idle) can still charge.

1.3, the electric energy of the - generator set can be charged directly to replace the charger of the fuselage.

1.4 can be used in humid environment of temperature -40 DEG C to +50 DEG C and relative humidity 98%RH is not dew.

1.5 may allow the battery to charge the battery and start the motor at the same time.

1.6 suitable for lead-acid batteries, especially for fully sealed solid wide temperature batteries.

1.7, product range includes 12V, 24V, 10A, 6A, 4A and other models, please select and install as required (product packaging has logo).

2Functional characteristics;

2.1 constant current fast charging: when the battery voltage is lower than the set value (12V / 12V battery, 24V battery / 24V), with the constant current charger for battery fast charging.

2.2 current limit: when the battery is charged to full (12V battery 24V battery is more than 12V, more than 24V), automatic charging current limit (Figure 1 characteristics such as constant pressure section).

2.3 floating: when charging the battery voltage reaches the set value (float 12V battery is about 13.8V, the 24V battery is about 27.6V), is automatically transferred to the floating state, which is about 0.1 ~ 0.2A charging current (with specific power supply - was electricity related).

2.4 stop charging: when the voltage of the charged battery reaches the filling setting value (12V is 14V, 2 is 28V), the charging output is automatically turned off.

2.5 overcurrent and short-circuit protection: the product has overcurrent and short-circuit protection perfect, because this product has a constant current characteristic, so when the battery capacity is large (resistance minimum), during the load short-circuit or electric charge in the startup of the motor case at the same time (when the starting current is very large, it is close to the short circuit for charger no damage). At the same time, due to this characteristic of the product, the charger does not need to be disconnected when the battery is used as the starting power.

3Installation instructions

The 3.1 charger terminal as shown in Figure 2: "L" 220V "N" 220V phase, the zero line, "an" grounding "+", connected with the anode of the battery, the battery "-".The grounding of the charger must be well grounded.

3.2 the product panel is equipped with indicator light (LED), when the indicator lamp presents different colors, it represents the different conditions of charging.

Red: constant current fast charging stage, that is, charging current is rated current value (including output short circuit is also red);

Yellow (red and green): floating stage charging current (constant voltage), which began to decrease, light reddish current large, partial greenLess current;

Green: the battery is basically full (green when the output is open).

4Be careful

The 4.1 product is specially designed for charging the battery, the output pulse containing ingredients, so in the case of no battery, can not be used directly as a power electronic device, otherwise it will make electronic - interference or damage;

4.2, if there is no good shockproof measures, it is not suitable to install the charger directly on the - engine set.

4.3, products should prevent water or other liquid spilled, and should pay attention to ventilation, heat dissipation, and away from high temperature and heat radiation.

 

Average rating: 5.0 based on 41 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
Links:medicalproduct非常的好用
Message Us