8000W high-power controllable silicon electronic voltage regulator motor fan electric drill variable speed governor temperature regulator 220V

Circuit function:
AC 0V-220V continuously adjustable, zero lag, zero delay, super strong heat dissipation.
Circuit characteristics:
Anti surge, anti peak, RC absorption multiple protection!
Technical parameters:
Operating voltage: AC 220V
Maximum power: 8000W, the limit power of resistive load. If used for a long time, the power should be reduced. It is recommended to use room temperature resistive load within 4000W (key parameters, please pay attention). Tin plating on the back can be increased as needed.
Voltage regulation: AC 0V-220V continuously adjustable. The voltage can be reduced to 0, and the starting voltage is about 60V.
Specification and size: High temperature and fire-resistant FR4 circuit board, circuit board size 60mm * 37mm, height 45mm
Be sure to connect the load in order to adjust the voltage.
Usage:
Connect the voltage regulator in series in the circuit, and connect the regulator, desk lamp, and electrical appliances in series in the circuit (i.e. disconnect any of the live or neutral wires of the desk lamp, electrical appliance, etc., and connect them to the wiring terminal of the product). Rotate the knob cap to adjust the light, speed, temperature, and voltage; Easy to operate and convenient.
Adopting a new type of bidirectional high-power thyristor with a current of up to 100 amperes, it effectively solves the overcurrent problem caused by the low resistance of the electric furnace wire during cooling; It is easy to adjust the output voltage of the mains power, continuously adjustable between 0V and 220V, with zero delay and zero lag. Usage examples: Adjusting the heating of electric furnaces and water heaters, adjusting the lighting of lamps, adjusting the speed of small motors, adjusting the temperature of electric soldering irons, adjusting the voltage of imported 110V appliances (220V to 110V), etc., in order to achieve the effect of temperature, light, speed, and pressure regulation. Maximum load power: 8000W. It can be used for large, medium, and small electrical appliances. Due to its high power, it is sufficient for general household appliances or small factories (the power of inductive or capacitive loads should be reduced). Gently rotate the knob cap to adjust it flexibly without adding any components, making the product practical and convenient.
Using high-power thyristor, BTA100-600B/800B, high efficiency!
1.6mm thick epoxy copper-clad sheet with high current design, buyers can use it upon receiving it.