[BELLA]Wind speed sensor / transmitter / cups anemometer (RS485 signal output )

Introduction:

YGC-FSWind speed sensor structure using conventional three wind cups , wind Cup selectionABSMaterials, high strength , good start ; sophisticated signal processing unit may output a variety of signals according to user needs . This product has great range , good linearity , easy observation , stable and reliable, and can be widely used for meteorological, oceanographic , environmental , airports, ports , laboratories, industry and agriculture , and transportation and other fields.

Physical map

Demonstration Figure

Features:

ComplyWMOWorld Meteorological Organization specification (CIMO Guide)

High sensitivity : Starting wind speed0.3m / s

Measuring range: Measuring range0-70m / s

High Accuracy : Accuracy is(0.3 + 0.03V) m / s(V:Wind speed )
For a variety of harsh environments, Wind strength .

Use:

Port near the ground floor level of wind direction and speed measurement
Field of meteorological environment
Airport Expressway Monitoring
Agriculture, forestry, environmental protection industry

Technical parameters:

Structure Size:

Installation Instructions:

1 ,Ensure that the mounting bracket parallel to the ground ;

2 ,UseM3Screw nut through the sensor4Mounting holes , the sensor is fixed to the mounting bracket ;

3 ,By reservedM23Route Kong , the Hang Hang plug connector and socket connected to the sensor ;

4 ,Please avoid demolition installation process sensor .

Note:

1 ,Please check the packaging is intact, and check product model is consistent with the selection ;

2Do not live wiring, check the wiring is complete and correct before electricity ;

3,Long sensor product line will affect the output signal ,Have been welded components or wires Do not tamper with the factory when using, Subject to change , please contact the manufacturer;

4 ,Sensor is a precision device , users do not disassemble use with sharp objects or corrosiveLiquid contact sensorsSurface to avoid damage to the product ;

5 ,Save the test certificate and certificate , along with product returns maintenance .

Troubleshooting :

1 ,Wind rod rotation ineffective , large hysteresis.Long-term use leads to the bearing of a foreign body or oil runs out. Please instrument oil injection or sent from the sensor on the bearing sensorBack to the company oiling ;

2 ,When the - output indicator represents the value0Or is not within range . May be due to wiring problems caused logger can not obtain information correctly. Please check the wiring is correct, firmly ;

3 ,If it is above reasons, please contact the manufacturer .