Cummins governor, 3062322cummins speed control board, electronic speed control, slow start generator parts

Function description:
3062322
It is a full closed loop control design, it is to load changes with the fast and instant response to control the engine speed, when the EFC series electronic actuator and magnetic speed sensor signal is connected to the match, the perfect control of CUMMINS engine.
In the design, it is simple to install and can be pre adjusted, including the speed ratio and idle speed, multiple machines or special purpose machine for input to assist, and prevent the - battery voltage, instantaneous pulse voltage, short circuit fault is in execution and lose speed sensor signal or power under the condition of safety protection.

Technical specifications:
The speed stability is better than + 0.25%
Speed range 1KHz ~ 6.5KHz
Thermal stability + 0.7%
IDLE regulates 260 + 20Hz to 85% of the rated speed
DROOP regulates small position 15Hz + 6Hz / ampere load current variation
Position 400Hz + 75Hz / ampere load current variation
External speed regulation + 200Hz (external 1K)
AUX input sensitivity 148Hz / 1V., + 10Hz,
Impedance 1M

Environmental Science：
The working temperature range is -40 DEG C to 85 DEG C
Operating humidity range 95%
The storage temperature is -55 DEG C ~ 92 DEG C
Shock 20-100HZ 500mm/Sec.
Input power:
Supply voltage 12V and 24V DC battery system
Polar electrode
Power consumption 40mA
Actuator continuous current small 1A; 4.5A (3062322 current can reach 8A)
Speed sensor signal 2 ~ 120V RMS
Note: the above performance parameters are measured at the operating frequency 3800Hz

The EFC remote module is used in the PT (G) fuel system and is applicable to the Cummins N and K - generator sets in the United states. There are two systems of normally open and normally closed. 3044196, for the following 500KW normally closed units, 3098693 or 3062322 for more than 500KW of the normally closed unit, 3037359 for the following 300KW normally open unit.