Deep sea controller, DSE6120 - generator set, automatic starting controller, 6120 generator fittings

DSE6120 is a single unit, utility failure self starting module designed to operate on electronic and non electronic engines and provide advanced engine monitoring and protection functions.

The module includes backlit liquid crystal displays that clearly show the engine's status at any time. It monitors frequency, voltage, current, oil pressure, coolant temperature, and fuel quantity. The module is also designed to show the engine's warning and shutdown status.

The module consists of six inputs, three - inputs and six outputs. Two of these outputs can be configured with a magnetic probe version, and all six can be configured in the CANBUS version. The module can be programmed via the front panel or configured using DSE's configuration package computer software.

Main features

Low battery voltage starting

Clock

Scheduler

Standard function

• CAN and magnetic probe version

Personal computer and front panel configuration

• 6 digital inputs / 3 - inputs

• 6 outputs (2 can be magnetic probe version configuration, 6 can be CANbus version configuration)

• three-phase generator and commercial voltage monitoring

• event record (item 10)

Configurable timer

• automatic shutdown or warning when a fault condition is detected

• remote load or no-load start

• engine warm-up

Advanced metering function

Engine hour counter

Red indicator light warning or shutdown

Backlit LCD display

• protected solid state output (PSS)

Advantages • power transfer between city power (power grid) and generator

• the hour counter provides accurate monitoring and maintenance cycle information

• user friendly settings and button layout

• monitor multiple engine parameters at the same time

• modules can be configured to meet individual requirements

• a wide range of engines can be specified

• use DSE's PC suite software configuration to simplify programming

• provide advanced protection in accordance with IP65/NEMA 12 waterproof grade when supplied with gaskets

Free computer software

Manual mode operation

The engine starts using the hand shape and the start button in front of the module.

Once pressed, the module instructs the engine to start the warm-up program and then start the engine.

To stop the engine, press the stop button in front of the module

Auto mode

Press the Auto button to put the module in auto mode.

The startup process of this module is activated by remote boot input.

Preheat the program, then start, and the engine will start.

To stop the engine, cancel the remote start signal or press the stop button of the module.

We offer a one year warranty for all our products. If in the warranty period, because our product quality problems, you can choose to return, exchange or free maintenance. If the warranty period is over, but there is a warranty requirement, you can contact us directly, and we will contact the special technical engineer to contact you.

-